Thermo King Athenia AM II 700
Call for Price
Key Features
Availability
Brochure
MakeThermo King
ModelAthenia AM II 700
Product Features
Description
A complete range of low-weight, high-performance roofmount HVAC systems for coach and transit applications. Featuring an updated design that delivers improved quality and reliability while offering new features and significant enhancements.
Features
- 10% weight reduction
- Welded frame
- Reduced number of potential leak points
- No sealants used in design
- Stiffer construction for improved unit/bus sealing
- 10% more condenser airflow
- 5% more evaporator airflow
- Access all servicable items from inside bus
- Easy-to-install one-piece design
- IntelligAIRE® III microprocessor controller with CANBUS communications
- Designed to fit CNG, hybrid and diesel buses
Standard Features
- IntelligAIRE® III Control System: Expanded CAN communications capability; Plugs directly into J1939 network to make more info available; Eliminates the gateway module required between bus & unit controllers; Eliminates need for expansion modules external to controller where multiple zones must be controlled independently
- The Thermo King X430 Compressor: Engineered exclusively for transport applications; Built for extended service life; Field repairable
- High Performance R-407C or R-134A: Environmentally safe alternatives with zero ODP
- Electronic Capacity Control: Capacity can be reduced when not needed for fuel savings on cooler days; Improved temperature balance on Arctic buses so capacity can be shifted from unit to unit as needed
- Motorized Water Valve: Improved temperature control in re-heat and heating modes; Eliminates water hammer
Optional Features
- Long Life Brushless Motors: Integral electronics; 10% greater airflow; Maintenance-free; Programmable variable speed; 40,000-hour bearings
- IntelligAIRE® III Electronic Pressure Display Module: Touchpad displays four different pressure readings; Simplifies problem diagnosis and pre-trip inspections
- S391/S616 Screw Compressors: Exclusive oil management system for increased reliability; Fewer moving parts than reciprocating compressors; Lower noise levels and vibration than reciprocating compressors; Programmable capacity control for fuel savings
- Other Available Options: Return Air Grille; Damper-Controlled Fresh Air Module
System Cooling Capacity
- BTU/hr: 76,000
- kW: 22.3 kW
- Kcal/hr: 19,151
- Rated Capacities are at the following conditions: Outside: 35°C/95°F; Inside: 27°C/80°F DB, 19°C/67°F WB
System Heating Capacity
- At 30 Lt./Min.(8 GPM) coolant flow rate and 55K (100°F) temperature differential between return air and coolant.
- BTU/hr: 90,000
- kW: 26.4
- Kcal/hr: 22.7
Evaporator Airflow
- (0 in. water column external static pressure)
- High Speed: 2150 ft3/min
- Medium Speed: 1266 ft3/min
- Low Speed: 900 ft3/min
Refrigerant
- HFC R-134A
Power Consumption @ 27 VDC
- 75.2 Amps
Weight
- 435 lbs (197 kg)
Compressor Weight with Clutch (approximate)
- S391: 147 lbs (67 kg)
- S616: 171 lbs (77 kg)
- X426/X430: 115 lbs (52.2 kg)
Capacities
Cooling Capacity | 76,000 BTU/hr (22.3 kW) |
Heating Capacity | 90,000 BTU/hr (26.4 kW) |
Airflow
Airflow Volume | High Speed: 2150 ft3/min |
General
Weight | 435 lb. (197 kg) |
Dimensions | 81.45 x 79.22 x 12.38 in. |